P2.5 Indoor LED Display is cost-effective for indoor video wall applications.
P2.5 indoor LED display has a pixel pitch of 2.5mm. And the pixel density is 160,000 dots/m2. Correspondingly, the best view distance is 2.5 meters away where the image is not pixelated. It attracts people from a long distance to close with its stunning colors. Besides, it is space-saving and easy to install. You can replace your projection or LCD with a P2.5 LED display. It also has a competitive price. You can get benefits soon after this investment. Use it for churches, shopping malls, traffic hubs, etc.
LED Screen Specification:
- Pixel pitch: 2.5mm
- LED Panel size: 640x480mm
- LED screen size: 3840x2400mm
- Pixel Resolution: 1,536×960
- Refresh rate:> 3840hz
- Contrast: 5,000:1
- Brightness: 800nits
P2.5 LED Display Panel is die-casting aluminum
The LED panel is versatile HHAI series. The panel size is 640x480mm with an aspect ratio of 4:3. Therefore it is easy to reproduce FHD or UHD images. The die-casting aluminum panel is modular, precise, and scalable. You can customize the screen according to your requirement, from small to large size, in flat, right-angled, or curved. The screen can be hanged, wall-mounted, or stacked. The panel also has a safe, fast, and uniform locking system. Therefore, you can assemble the panels quickly with zero gaps.
Space-saving
The LED panel is ultra-thin and lightweight, thus space-saving. The thickness is about 52mm. Besides, it has magnet front access. We will maintain the screen in front. Therefore, there is no need for space in the rear. You can build the LED panels on the wall without a bracket when the wall is solid and flat. You can also hang it from the ceiling. The panel weight is 6.5kg.
Eye-catching
The brightness is 800nits, thus clear to watch in any bright indoor environment. Besides, it has a large view angle, 140 degrees vertically and horizontally. It captives more visitors from a long distance. The stunning image has a high refresh rate and high contrast to display smoothly.
Quick Assembly
The LED panel is die-casting aluminum, hence precise and uniform. It is also handy to carry for less damage during the installation. Moreover, the locking mechanism is safe, uniform, and strong. So it is quick to assemble the panels flat.
First, align the panels with locating pins. Second, assemble the panels with locks. Two locks are on each side. Third, connect the cables between panels. They are with plug to connect with the socket in the panel. Last, fix the LED modules with vacuum suction.
Easy Maintenance
Maintain the screen in front with vacuum suction. The inside design is neat and clear. Besides, each component works independently. There is no need to replace the whole screen if there is a fault. Dismantle it to replace a new one. Enough spare parts are together with the screen.