No Worries if people can touch your Indoor LED Display P1.8 with GOB technology
Indoor LED display P1.8 has small LEDs which is easy to be scratched. Then, we use GOB technology which covers transparent glue on the LEDs. So it enhances the ability for physical damage. For example, it is water-resistant and anti-scratch. Furthermore, it is easier to clean the screen with wet mop.
|watch: P1.8 LED display water-resistant test
P1.8 LED display is for close view distance, small size or displaying HD images. For example, the best view distance is from 1.8 meters away, thus no pixelated image. The screen is eye-catching for your commercial advertising, congregations, broadcasting, etc. However, you should protect it well if customers can touch it easily and often.
Usually, LED displays are with louver on the LEDs to protect it from damage. But P1.8 LED display has a narrow pixel pitch. Therefore, there is no space for louver covering on the LEDs.
How to protect it well? GOB technology can do this. The screen will be water-resistant, anti-scratch, anti-dust, and anti-static. But it also has cons. For example, the uniformity is bad and looks dirty if the craft is not good.
Promotion of P1.8 indoor LED Display GOB
It is a good time for you if you need a fine pitch indoor LED display just now. Our P1.8 LED display is in the promotion. Whether you only buy LED modules or panels, it is the most cost-effective. Here is the specification;
- Pixel pitch: 1.86mm
- LEDs: SMD1515 Nationstar
- Driving IC: SUM16389
- LED Module: 320x160mm
- LED Panel: 640x480mm & 640x640mm
- LED Panel material: Die-casting aluminum
- Magnet front access
- brightness: 700nits
- Refresh rate:>3840hz
- Contrast: 5,000:1
- Voltage:100-240v
What is the price now? Here is the rough price for you. The LED module is about USD37.00 while the whole screen is about USD1,270.00/M2. As you know, each project is customized. Therefore the price would be a little different. Please contact us our sales representative for the best and accurate quotation.
Good Performance, Quick Installation, and Easy maintenance
|P1.8 GOB LED Display is in the aging test.
P1.8 LED display has good performance such as high pixel resolution, high brightness, wide view angle, wide color gamut, high refresh rate, low power consumption, high contrast, and good grayscale.
Because of its high pixel resolution, 288,906 dots/m2, it is easy to have a 1080p, 4k, and more pixel definition. For example, the screen size of 7.2 square meters has 1080p pixel resolution. If you need 4k, the screen size will be about 28.7m2.
The brightness is about 700nits whereas 1000nits is available. The brightness is enough for any indoor bright environment, thus eye-catching easily. Furthermore, it has wide view angle and high contrast which enhances the visibility. The wide color gamut, high refresh rate, and good grayscale display stunning spectrums without flicker.
There are two LED panels, one is 640x640mm and the other is 640x480mm. The are die-casting aluminum panel which is precise, lightweight, thin, and stiff. One person can fetch and mount it alone. Besides, the modular panels are easy to assemble with their fast latches seamlessly.
The LED module has magnet for front access. Therefore, there is no need to leave space in the back for maintenance. You will maintain the whole screen in front. The whole screen is tidy and neat. And there is no cable outside. If there is any fault, just remove the LED module with vacuum suction and check the reason. It is not difficult to find out the problem. Then, we can replace a new component or repair it. There are enough spare parts when we ship the screen to you.