P1.5 LED video wall is seamless, although it is spliced with many LED screen panels. There are 56pcs LED panels in total. After adjusting, the LED wall will be in the aging test.
P1.5 LED Video Wall is concave to display HD images and videos
LED screen wall is custom and scalable. So, you can assemble the LED panels into different sizes and shapes as you need. For example, the video wall can be flat, concave, or convex. However, the panel size is 480x480mm. So, the video wall size will be multiple of 480mm. P1.5 LED screen is one of the fine pixel pitches. And the pixel density is 401,111 dots/m2. Therefore, it is easy to get a 1080p or more LED video wall.
This LED Panel is HHAI series. It is versatile for indoor video wall applications. For example, it is space-saving. There is no need special space or location to install a LED video wall in your stores, churches, or auditoriums. It is also easy to build up a wall-mounting or hanging LED wall.
LED Module Wireless Connection
There is no cable connection between the LED module and LED panel. That is to say, it is a board-to-board connection. The inside of the panel is neat and tidy. Besides, it saves time. For example, you do not need to detach the wires from the LED module after you dismantle the LED module from the panel with vacuum suction. One panel has four LED modules. And the module size is 240x240mm.
Easy Maintenance
Fix the LED module on the LED panel with magnets. These magnets are averaged on the housing of the module for uniformity. First, disassemble the LED modules with vacuum suction in front of the video wall if there is a problem. Second, check the components inside if there is no problem of the LED modules. And it is easy to find out the problem. Then, replace a new one or repair it. Finally, assemble the LED modules back.
Space-saving LED Video Wall
There is no need to leave space for maintenance in the rear. In addition, the LED panel is thin, about 52mm. You can mount the panels directly on the wall if it is solid and flat. Usually, we will pack the panels and LED modules separately. You will connect the LED panels on the wall firstly. There are quick latches on each side. Then fix the panels on the wall with metal connectors. And adjust the gap between each panels. Connect the cables between each panels if the panels are uniform and seamless. At last, mount the LED modules on the panel.
Stunning Colors
We use high quality electronic components such as LEDs, driving chips, and capacitors. The LED video wall has high refresh rate, high brightness, wide view angle, wide color gamut, low power consumption, etc. It can reproduces the colors you need.
Contact us if you need more information and price about P1.5 LED Video wall.