Bifacial P2.6 LED Screen for Advertising
LED screen for advertising has high pixel resolution, high brightness, wide color gamut, and wide view angle to attract more customers’ attention. It displays dynamic videos, images, and text to advertise as more information as possible. Besides, it is custom, seamless, and scalable. Furthermore, the screen has lightweight, easy installation, less power consumption, and easy maintenance.
It is cost-effective to replace you old equipments or build a new LED screen without much change. For example, a double-sided P2.6 LED screen HHGI series hanging installation in the shop.
|Watch: Bi-facial LED Screen P2.6 is in the aging test in the factory.
Lightweight and Thin LED Screen for Advertising
The double-sided LED screen is only 54mm thick. Besides, the weight is about 28kg/m2. It is handy to fetch and build during installation without damage.
Whether you stack the screen from the bottom or hang it from the top, it is easy to build the bi-facial screen for your advertising. However, the screen is recommended less 4m height considering the safety and uniformity. If you need a outer frame, we can also make it for you.
Easy to build and maintain
There are three standard panel sizes, 1000x250mm, 750x250mm, and 500x250mm. You can combine them together for a flexible sizes and shapes, from a small stretched screen to a large video wall, from flat to right-angled.
The LED panel has quick inner locking system to assemble the panels up and down, left and right. For example, there are two hanging hooks in the top and two side-locks. Once you align the panels, lock them with a hexagon tool tightly. Besides, there are anti-impact design on the outermost of the panel to ensure the zero-gaps between panels.
The inside of the LED panel is compact, tidy and neat. Further, There is no cable connection visible. That is to say, the connection of the LED module with panel is with magnets. Besides, it is cable-free with control box for signal and power. The cable connection between panels are embedded. Therefore, it is easy to detach the electronics from the screen in front.
Easy to control
You can control the screens either synchronously or asynchronously, depending on the screen sizes and pixel resolution. If it is a large video screen in a shopping mall, synchronous system is required. However, if you have several small screens in your brand stores in different location, you can control them anytime anywhere through cloud. There are two main control systems, colorlight and novastar.
Contact us for the solution of the LED screen for advertising!
P2.6 LED screen is mostly for indoor commercial uses. There are other pixel pitches available, such as 1.2mm, 1.5mm, 1.8mm, 2.9mm, 3.9mm. We also have other series panels for indoor uses. For outdoor uses, you can check our outdoor series as well.